Welcome to the website of Dalian Barnet Flex Hydraulic Co., Ltd.!

搜索
Search
BNTFLEX @ WhatsApp

BNTFLEX Hotline
You can contact the BNTFLEX SERVICE Hotline at the phone number +8618322701295
Open Number directly in click here.

BNTFLEX SALES Hotline
You can contact the BNTFLEX SALES Hotline at the phone number+8618522290645
Open Number directly in WhatsApp click here.
imgboxbg

NEWS CENTER

Position:
Homepage
/
/
/
The Transport and commissioning of the hose crimping machine

The Transport and commissioning of the hose crimping machine

  • Categories:Company News
  • Author:
  • Origin:
  • Time of issue:2020-06-14
  • Views:0

(Summary description)1. The hose crimping machine should be handled by forklift, and the bottom of the machine should be used for force, and the body is not allowed to tilt. It is strictly forbidden to lift the crimping h

The Transport and commissioning of the hose crimping machine

(Summary description)1. The hose crimping machine should be handled by forklift, and the bottom of the machine should be used for force, and the body is not allowed to tilt. It is strictly forbidden to lift the crimping h

  • Categories:Company News
  • Author:
  • Origin:
  • Time of issue:2020-06-14
  • Views:0
Information
1. The hose crimping machine should be handled by forklift, and the bottom of the machine should be used for force, and the body is not allowed to tilt. It is strictly forbidden to lift the crimping head and scale.
2. The hose crimping machine needs to be fixed on a solid foundation horizontally and be grounded.
3. Open the casing and add 55-60 liters of anti-wear hydraulic oil No. 46 to the oil tank (hydraulic oil must be clean, otherwise it will damage the service life of the equipment). Note: If the hydraulic oil is added too little, it will cause the temperature of the oil to rise too fast and too high, the viscosity of the oil will decrease too quickly, the oil becomes too thin, and the seal ring may not seal the oil, resulting in a rise in system pressure Not going up.
4. Connect the power cord to the power supply specified by the machine, and jog the motor to observe the rotation direction. The rotation direction of the motor should be consistent with the direction indicated by the arrow on the oil pump label.
5. The ruler is located on the front cover of the oil cylinder and is used to adjust the shrinkage of the crimping hose sleeve. Adjust clockwise to reduce the amount of contraction; adjust counterclockwise to increase the amount of contraction. The spring of the ruler base is pressed against the end surface of the cylinder by the spring force of the three screws. Pull the ruler (vertical direction of the end surface of the cylinder) by hand. The scale base should be able to flexibly leave the end cover of the cylinder. After loosening, the spring force is automatically pressed against the end of the cylinder Cover. Before starting withholding, you should carefully check whether the scale is flexible. Do not fasten the scale to the end cap of the cylinder with screws, otherwise the scale will be damaged.
6. The pressure of the machine system is adjusted by the overflow valve. Adjust the pressure clockwise to increase, and counterclockwise to decrease the pressure (adjusted at the factory, you can adjust it if necessary, but never exceed the rated pressure of the pump).
7. The speed of the mold opening speed is controlled by the diverter valve, adjusted clockwise, the mold opening speed is accelerated, and the counterclockwise adjustment, the mold opening speed is slowed, but too fast the mold opening speed will increase the noise (adjusted at the factory, You can adjust it if necessary).
 

Scan the QR code to read on your phone

CONTACT FORM

We’ll take the time to explain the recommended solution and its price

Username used for comment:
Customer message
Description:

BNTFLEX SOCIAL

pinterest
pinterest
twitter
twitter
facebook
Bntflex
youtube
youtube

CONTACT

Copyright © 2019 Dalian Barnett Flex Hydraulics Co.,Ltd.       辽ICP备20000203号

电话

邮箱

产品