Welcome to the website of Dalian Barnet Flex Hydraulic Co., Ltd.!

搜索
Search
BNTFLEX @ WhatsApp

BNTFLEX Hotline
You can contact the BNTFLEX SERVICE Hotline at the phone number +8618322701295
Open Number directly in click here.

BNTFLEX SALES Hotline
You can contact the BNTFLEX SALES Hotline at the phone number+8618522290645
Open Number directly in WhatsApp click here.
imgboxbg

NEWS CENTER

Position:
Homepage
/
/
How Does The Crimping Machine Work?

How Does The Crimping Machine Work?

  • Categories:News
  • Author:
  • Origin:
  • Time of issue:2022-01-09
  • Views:0

(Summary description)How Does The Crimping Machine Work?
The crimping machine firmly crimps the metal fittings on the matching high-pressure oil hoses for construction machinery or the brake hoses, oil hoses, air-conditioning hoses and power hoses of automobiles. The crimping machine is suitable for crimping various types of mechanical high and low pressure oil hoses, gas hoses, water hoses, cable fittings, automobile air conditioning hoses, automobile power steering hoses, oil hoses, gasoline fuel supply hoses, as well as building accessories and daily hot water gas hoses. It is widely used in Vehicles, construction machinery, hydraulic machinery, welding and cutting equipment and other industries.
The working process of the crimping machine:

The crimping mechanism is the working mechanism of the crimping machine. The pressure sleeve realizes reciprocating motion driven by the cylinder piston, and continuously compresses and relaxes the spring pressure head fixed on the front plate. Put the assembled joint into the appropriate position in the middle circular hole of the spring pressure head, start the motor, drive the oil pump to supply oil, control the direction of the electromagnetic reversing valve, drive the cylinder piston to move forward, and pass the pressure sleeve with the inner cone hole. , press the spring pressure head with the same taper to achieve the purpose of pressing. Press the mold opening button, the piston drives the pressure sleeve to move in the opposite direction, and the spring pressure head is restored. At this time, the hose fitting can be taken out from the crimping machine.

In recent years, the withholding machine has entered the mature development cycle of the industrial life. In such an environment, all manufacturers are based on tradition, stick to the existing models, and lack the courage to reform and innovate. The adverse consequences are: the development of the entire industry appears. Insufficient stamina, lack of stamina for enterprise management and technology improvement.

How to use the crimping machine:

1. Before starting the machine, add 50kg of 46# hydraulic oil to the crimping machine and the crimping machine at a time (preferably genuine original oil).​​

2. Connect the power supply, if you are using a three-phase motor, be careful not to connect it in reverse direction (top view: the motor fan rotates clockwise, one is forward rotation).​​

3. After the above process is completed, you can start the pressure test.​​

4. Use of crimping machine and crimping machine positioner: press 1mm more for each reverse rotation, and 0.01mm for each positive rotation, and so on, the same specification of hose and joint, the first metal joint reaches the required pressure, There is no need to move the positioner any more, keep pressing the specification, and the compressed data of the result is exactly the same. When you finish the pressure test of the first tubing, you have already learned it, and the rest is gradually proficient.

How Does The Crimping Machine Work?

(Summary description)How Does The Crimping Machine Work?
The crimping machine firmly crimps the metal fittings on the matching high-pressure oil hoses for construction machinery or the brake hoses, oil hoses, air-conditioning hoses and power hoses of automobiles. The crimping machine is suitable for crimping various types of mechanical high and low pressure oil hoses, gas hoses, water hoses, cable fittings, automobile air conditioning hoses, automobile power steering hoses, oil hoses, gasoline fuel supply hoses, as well as building accessories and daily hot water gas hoses. It is widely used in Vehicles, construction machinery, hydraulic machinery, welding and cutting equipment and other industries.
The working process of the crimping machine:

The crimping mechanism is the working mechanism of the crimping machine. The pressure sleeve realizes reciprocating motion driven by the cylinder piston, and continuously compresses and relaxes the spring pressure head fixed on the front plate. Put the assembled joint into the appropriate position in the middle circular hole of the spring pressure head, start the motor, drive the oil pump to supply oil, control the direction of the electromagnetic reversing valve, drive the cylinder piston to move forward, and pass the pressure sleeve with the inner cone hole. , press the spring pressure head with the same taper to achieve the purpose of pressing. Press the mold opening button, the piston drives the pressure sleeve to move in the opposite direction, and the spring pressure head is restored. At this time, the hose fitting can be taken out from the crimping machine.

In recent years, the withholding machine has entered the mature development cycle of the industrial life. In such an environment, all manufacturers are based on tradition, stick to the existing models, and lack the courage to reform and innovate. The adverse consequences are: the development of the entire industry appears. Insufficient stamina, lack of stamina for enterprise management and technology improvement.

How to use the crimping machine:

1. Before starting the machine, add 50kg of 46# hydraulic oil to the crimping machine and the crimping machine at a time (preferably genuine original oil).​​

2. Connect the power supply, if you are using a three-phase motor, be careful not to connect it in reverse direction (top view: the motor fan rotates clockwise, one is forward rotation).​​

3. After the above process is completed, you can start the pressure test.​​

4. Use of crimping machine and crimping machine positioner: press 1mm more for each reverse rotation, and 0.01mm for each positive rotation, and so on, the same specification of hose and joint, the first metal joint reaches the required pressure, There is no need to move the positioner any more, keep pressing the specification, and the compressed data of the result is exactly the same. When you finish the pressure test of the first tubing, you have already learned it, and the rest is gradually proficient.

  • Categories:News
  • Author:
  • Origin:
  • Time of issue:2022-01-09
  • Views:0
Information

How Does The Crimping Machine Work?
The crimping machine firmly crimps the metal fittings on the matching high-pressure oil hoses for construction machinery or the brake hoses, oil hoses, air-conditioning hoses and power hoses of automobiles. The crimping machine is suitable for crimping various types of mechanical high and low pressure oil hoses, gas hoses, water hoses, cable fittings, automobile air conditioning hoses, automobile power steering hoses, oil hoses, gasoline fuel supply hoses, as well as building accessories and daily hot water gas hoses. It is widely used in Vehicles, construction machinery, hydraulic machinery, welding and cutting equipment and other industries.
The working process of the crimping machine:

The crimping mechanism is the working mechanism of the crimping machine. The pressure sleeve realizes reciprocating motion driven by the cylinder piston, and continuously compresses and relaxes the spring pressure head fixed on the front plate. Put the assembled joint into the appropriate position in the middle circular hole of the spring pressure head, start the motor, drive the oil pump to supply oil, control the direction of the electromagnetic reversing valve, drive the cylinder piston to move forward, and pass the pressure sleeve with the inner cone hole. , press the spring pressure head with the same taper to achieve the purpose of pressing. Press the mold opening button, the piston drives the pressure sleeve to move in the opposite direction, and the spring pressure head is restored. At this time, the hose fitting can be taken out from the crimping machine.

In recent years, the withholding machine has entered the mature development cycle of the industrial life. In such an environment, all manufacturers are based on tradition, stick to the existing models, and lack the courage to reform and innovate. The adverse consequences are: the development of the entire industry appears. Insufficient stamina, lack of stamina for enterprise management and technology improvement.

How to use the crimping machine:

1. Before starting the machine, add 50kg of 46# hydraulic oil to the crimping machine and the crimping machine at a time (preferably genuine original oil).​​

2. Connect the power supply, if you are using a three-phase motor, be careful not to connect it in reverse direction (top view: the motor fan rotates clockwise, one is forward rotation).​​

3. After the above process is completed, you can start the pressure test.​​

4. Use of crimping machine and crimping machine positioner: press 1mm more for each reverse rotation, and 0.01mm for each positive rotation, and so on, the same specification of hose and joint, the first metal joint reaches the required pressure, There is no need to move the positioner any more, keep pressing the specification, and the compressed data of the result is exactly the same. When you finish the pressure test of the first tubing, you have already learned it, and the rest is gradually proficient.

Keyword:

Scan the QR code to read on your phone

CONTACT FORM

We’ll take the time to explain the recommended solution and its price

Username used for comment:
Customer message
Description:

BNTFLEX SOCIAL

pinterest
pinterest
twitter
twitter
facebook
Bntflex
youtube
youtube

CONTACT

Copyright © 2019 Dalian Barnett Flex Hydraulics Co.,Ltd.       辽ICP备20000203号

电话

邮箱

产品