My Country's Hydraulic Machinery Crimping Machine Industry Has Broad Prospects For Development

Time of issue:

2022-01-17

My Country's Hydraulic Machinery Crimping Machine Industry Has Broad Prospects For Development With the improvement of industrialization and automation level, these equipments need to be equipped with a large number of high-performance and high-reliability hydropneumatic and sealing components. According to preliminary calculations, it is estimated that by 2013, the total domestic demand for hydraulic, hydraulic, pneumatic and sealing products will increase from 20 billion yuan in 2005 (including about 900 million US dollars in imports and nearly 300 million US dollars in exports) to about 35 billion yuan (including about 30 billion yuan in exports). Imports are about 1.5 billion US dollars and exports are about 500 million US dollars). Among them, hydraulic products increased from more than 10 billion yuan to 20 billion yuan, hydraulic products increased from more than 1 billion yuan to more than 2 billion yuan, pneumatic products increased from nearly 3 billion yuan to more than 5 billion yuan, and sealing products increased from more than 3 billion yuan. Yuan increased to 7 billion yuan. construction machinery Construction machinery is the largest user of hydraulic products, accounting for 42.3% of industry sales, and the proportion will expand in the future, so the development trend of construction machinery is very important. It is estimated that by 2013, the annual demand for hydraulic excavators will be about 60,000 to 80,000 units, bulldozers (over 120 horsepower) will be nearly 10,000 units, loaders will be about 100,000 to 120,000 units, graders will be about 2,000 units, and road rollers will be about 1.5 million units. There are about 20,000 engineering cranes, about 80,000 forklifts, and nearly 10,000 cement mixers. In addition, my country now has about 1.4 million construction machinery, which is expected to reach 2 million by 2013. It is also reported that the hydraulic parts imported for the excavators, road machinery, cement mixers and other supporting facilities produced by domestic enterprises each year amount to more than 150 million US dollars. Weifang Yongfeng's hydraulic manufacturing share accounts for 30% of the country's total. In short, the market of hydraulic and seal parts for construction machinery and maintenance will face a new period of great development. These construction machinery products require a large number of high-performance and long-life crimping machines, pipe pressing machines, pipe locking machines, glue stripping machines, pressure testing machines, oil cylinders, cutting machines, etc. Metallurgical mining equipment It is understood that the utilization rate of hydraulic and pneumatic technology in metallurgical equipment reaches 6.1% to 8.1%, accounting for about 10% of the total equipment cost. From the analysis of industry statistics, hydraulic and pneumatic products directly provide support for the metallurgical industry, accounting for 14.5% and 9% of sales respectively (excluding retail sales). It is reported that the hydraulic, pneumatic and sealing products imported by the metallurgical industry for maintenance each year amount to tens of millions of dollars. Therefore, the demand for hydraulic and pneumatic seals for metallurgical and mining equipment supporting and maintenance will increase significantly. Metallurgical mining equipment will require a large number of plunger pumps, cartridge valves, solenoid valves, proportional valves, servo valves, oil cylinders, complete sets of hydraulic systems, pneumatic components and a large number of seals. By 2011, the annual demand for plastic machinery will reach about 150,000 units, of which injection molding machines account for about 40%. There are currently about 400,000 plastic machinery in my country, and it is expected to reach about 800,000 by 2013. Although the current development trend of small and medium-power injection molding machines using electric drives, according to analysis, in the next few years, due to plastic products and costs and other reasons, in addition to high-precision, high-efficiency, and high-quality products that require electric drives, my country will still have a large number of Apply fluid transmission. Therefore, the market demand for plastic machinery supporting, maintenance hydraulic, pneumatic and sealing parts will still maintain a rapid growth trend.

Construction machinery is the largest user of hydraulic products, accounting for 42.3% of industry sales, and the proportion will expand in the future, so the development trend of construction machinery is very important. It is estimated that by 2013, the annual demand for hydraulic excavators will be about 60,000 to 80,000 units, bulldozers (over 120 horsepower) will be nearly 10,000 units, loaders will be about 100,000 to 120,000 units, graders will be about 2,000 units, and road rollers will be about 1.5 million units. There are about 20,000 engineering cranes, about 80,000 forklifts, and nearly 10,000 cement mixers. In addition, my country now has about 1.4 million construction machinery, which is expected to reach 2 million by 2013. It is also reported that the hydraulic parts imported for the excavators, road machinery, cement mixers and other supporting facilities produced by domestic enterprises each year amount to more than 150 million US dollars. Weifang Yongfeng's hydraulic manufacturing share accounts for 30% of the country's total. In short, the market of hydraulic and seal parts for construction machinery and maintenance will face a new period of great development. These construction machinery products require a large number of high-performance and long-life crimping machines, pipe pressing machines, pipe locking machines, glue stripping machines, pressure testing machines, oil cylinders, cutting machines, etc.

Metallurgical mining equipment

It is understood that the utilization rate of hydraulic and pneumatic technology in metallurgical equipment reaches 6.1% to 8.1%, accounting for about 10% of the total equipment cost. From the analysis of industry statistics, hydraulic and pneumatic products directly provide support for the metallurgical industry, accounting for 14.5% and 9% of sales respectively (excluding retail sales). It is reported that the hydraulic, pneumatic and sealing products imported by the metallurgical industry for maintenance each year amount to tens of millions of dollars. Therefore, the demand for hydraulic and pneumatic seals for metallurgical and mining equipment supporting and maintenance will increase significantly. Metallurgical mining equipment will require a large number of plunger pumps, cartridge valves, solenoid valves, proportional valves, servo valves, oil cylinders, complete sets of hydraulic systems, pneumatic components and a large number of seals.

By 2011, the annual demand for plastic machinery will reach about 150,000 units, of which injection molding machines account for about 40%. There are currently about 400,000 plastic machinery in my country, and it is expected to reach about 800,000 by 2013. Although the current development trend of small and medium-power injection molding machines using electric drives, according to analysis, in the next few years, due to plastic products and costs and other reasons, in addition to high-precision, high-efficiency, and high-quality products that require electric drives, my country will still have a large number of Apply fluid transmission. Therefore, the market demand for plastic machinery supporting, maintenance hydraulic, pneumatic and sealing parts will still maintain a rapid growth trend.

Keyword:

hose,crimping,tool,industrial,hose,crimps,hose,end,fittings,hose,fitings,hose,fitting,connector,hose,fitting,crimper,hose,fitting,crimping,tool,hose,fitting,machine,hose,fitting,type

What Should Be Paid Attention To When The Hose Crimping Machine Fails

Parts Of The Hose Crimping Machine That Need Regular Maintenance

What Should Be Paid Attention To When The Hose Crimping Machine Fails

Parts Of The Hose Crimping Machine That Need Regular Maintenance