NEWS CENTER
Operation Method Of Crimping Machine
- Categories:Company News
- Author:
- Origin:
- Time of issue:2021-04-19
- Views:0
(Summary description)Operation method of crimping machine
Crimping operation of crimping machine
1. When the crimping machine is used for the first time, it should be crimped 20 to 30 times without load, and it can be used after observing that all parts are normal.
2. The crimping machine should be crimped 20 to 30 times without load when used in winter to increase the oil temperature.
3. Press the open button, after the mold base is opened, select the corresponding mold to install on the mold base according to the specifications of the hose to be crimped, and adjust the micrometer scale.
4. Place the hose with the joint in the proper position in the press head, so that the entire length is crimped at one time.
5. Press the crimping button to execute crimping operation, until the crimping head stops crimping and automatically opens the mold.
6. Take out the crimped hose assembly and use a vernier caliper to check the outer diameter of the crimped joint jacket. If it does not match the parameter table, fine-tune the micrometer scale until the crimping of the next hose meets the requirements.
Operation Method Of Crimping Machine
(Summary description)Operation method of crimping machine
Crimping operation of crimping machine
1. When the crimping machine is used for the first time, it should be crimped 20 to 30 times without load, and it can be used after observing that all parts are normal.
2. The crimping machine should be crimped 20 to 30 times without load when used in winter to increase the oil temperature.
3. Press the open button, after the mold base is opened, select the corresponding mold to install on the mold base according to the specifications of the hose to be crimped, and adjust the micrometer scale.
4. Place the hose with the joint in the proper position in the press head, so that the entire length is crimped at one time.
5. Press the crimping button to execute crimping operation, until the crimping head stops crimping and automatically opens the mold.
6. Take out the crimped hose assembly and use a vernier caliper to check the outer diameter of the crimped joint jacket. If it does not match the parameter table, fine-tune the micrometer scale until the crimping of the next hose meets the requirements.
- Categories:Company News
- Author:
- Origin:
- Time of issue:2021-04-19
- Views:0
Operation method of crimping machine
Crimping operation of crimping machine
1. When the crimping machine is used for the first time, it should be crimped 20 to 30 times without load, and it can be used after observing that all parts are normal.
2. The crimping machine should be crimped 20 to 30 times without load when used in winter to increase the oil temperature.
3. Press the open button, after the mold base is opened, select the corresponding mold to install on the mold base according to the specifications of the hose to be crimped, and adjust the micrometer scale.
4. Place the hose with the joint in the proper position in the press head, so that the entire length is crimped at one time.
5. Press the crimping button to execute crimping operation, until the crimping head stops crimping and automatically opens the mold.
6. Take out the crimped hose assembly and use a vernier caliper to check the outer diameter of the crimped joint jacket. If it does not match the parameter table, fine-tune the micrometer scale until the crimping of the next hose meets the requirements.
Scan the QR code to read on your phone
CONTACT FORM
We’ll take the time to explain the recommended solution and its price
CONTACT
Mona Tel: +8618522290645
Email: mona@bntflex.com
Wechat/Whatsapp:+8618522290645
Skype: barnettcrimpingmachine
Copyright © 2019 Dalian Barnett Flex Hydraulics Co.,Ltd. 辽ICP备20000203号