Welcome to the website of Dalian Barnet Flex Hydraulic Co., Ltd.!

搜索
Search
BNTFLEX @ WhatsApp

BNTFLEX Hotline
You can contact the BNTFLEX SERVICE Hotline at the phone number +8618322701295
Open Number directly in click here.

BNTFLEX SALES Hotline
You can contact the BNTFLEX SALES Hotline at the phone number+8618522290645
Open Number directly in WhatsApp click here.
imgboxbg

NEWS CENTER

Position:
Homepage
/
/
/
How to choose hydraulic hose crimping machine?

How to choose hydraulic hose crimping machine?

  • Categories:Company News
  • Author:
  • Origin:
  • Time of issue:2020-06-01
  • Views:0

(Summary description)To distinguish the advantages and disadvantages of the hose crimping machine, we can use one-look, two-listen and three-measure methods to distinguish:
1. Look: Observe whether the hydraulic accessori

How to choose hydraulic hose crimping machine?

(Summary description)To distinguish the advantages and disadvantages of the hose crimping machine, we can use one-look, two-listen and three-measure methods to distinguish:
1. Look: Observe whether the hydraulic accessori

  • Categories:Company News
  • Author:
  • Origin:
  • Time of issue:2020-06-01
  • Views:0
Information
To distinguish the advantages and disadvantages of the hose crimping machine, we can use one-look, two-listen and three-measure methods to distinguish:
1. Look: Observe whether the hydraulic accessories and electrical components selected by the hydraulic hose crimping machine are famous brand products or regular manufacturers; whether the circuit configuration is regular; whether the pipeline design of the oil station is reasonable; whether there is oil leakage at the connection. If you pass the visual inspection above, you can proceed to the next inspection.
2. Listen: Turn on the device after power on, and listen to whether the device is running normally. If there is abnormal noise, it is often because the coaxiality of the motor and the oil pump is not up to the standard. The other reason may be caused by the unreasonable selection of the displacement and pipe diameter of the oil pump. Not very well caused.
3. Measurement: Finally, the main parameters of the equipment are measured
3.1 Leave the device in the dry running state and touch each mold base block with your hand. There should be no jitter in the hand, otherwise it will be regarded as unqualified product.
3.2 Install the device on the mold, withhold a sample joint, and measure the withholding joint with a caliper or micrometer. The roundness and taper should be within 0.1mm, which is considered good.
3.3 The hardness of the mold base and the mold hardness are also the key to the normal use of the equipment in the future. Customers can ask the manufacturer to test the mold base or mold with a desktop or portable hardness tester. When the mold base hardness is lower than Rockwell HRC60 mold hardness is lower than Rockwell HRC50, it will affect the hose crimping quality.
3.4 Finally, inspect the eight-lobe uniform division of the mold base of the equipment and the flatness of the mold. Good equipment will specifically control and adjust these two items, while some low-quality equipment does not control the above two parameters.

Scan the QR code to read on your phone

CONTACT FORM

We’ll take the time to explain the recommended solution and its price

Username used for comment:
Customer message
Description:

BNTFLEX SOCIAL

pinterest
pinterest
twitter
twitter
facebook
Bntflex
youtube
youtube

CONTACT

Copyright © 2019 Dalian Barnett Flex Hydraulics Co.,Ltd.       辽ICP备20000203号

电话

邮箱

产品