Remember three points in the operation of the crimping machine
Time of issue:
2021-07-14
Remember three points in the operation of the crimping machine With its performance, the crimping machine is used in construction machinery, vehicles, hydraulic machinery, welding and cutting equipment and other industries, and has been favored. In the process of use, the operator can easily overlook some operating procedures: 1. The operator must operate in accordance with the process regulations. 2. The power supply must be cut off after the machine is stopped. 3. When changing the mold, it must be done after the shutdown. 4. The joint surface of the mold seat and the mold should be kept clean, and there should be no hard objects such as metal shavings. 5. Pour lubricating oil on the inclined surface of the mold base before starting the machine. 6. The positioning screws must be tightened before installing the module. 7. The pressure regulating valve must be adjusted under the specified pressure. 8. It is strictly forbidden to reach inside when working. 9. The electrical safety regulations must be observed when overhauling electrical parts Whether the operation of the crimping machine is correct and reasonable is related to the quality of the crimping, so we will share the three points of attention to the operation of the crimping machine. 1. When crimping, prevent tools and other foreign objects from entering the crimping head. 2. When crimping, place the joint in the center of the mold as much as possible, and do not press on the hexagonal nut. 3. After the work is completed, the eight mold bases must be opened to the maximum extent, so that the spring can be in an open state and the spring can be maintained, and the oil cylinder is also in a pressure relief state to extend the life of the oil seal. The staff abide by the operating precautions of the three-point crimping machine to better achieve the crimping effect.
Remember three points in the operation of the crimping machine
With its performance, the crimping machine is used in construction machinery, vehicles, hydraulic machinery, welding and cutting equipment and other industries, and has been favored. In the process of use, the operator can easily overlook some operating procedures:
1. The operator must operate in accordance with the process regulations.
2. The power supply must be cut off after the machine is stopped.
3. When changing the mold, it must be done after the shutdown.
4. The joint surface of the mold seat and the mold should be kept clean, and there should be no hard objects such as metal shavings.
5. Pour lubricating oil on the inclined surface of the mold base before starting the machine.
6. The positioning screws must be tightened before installing the module.
7. The pressure regulating valve must be adjusted under the specified pressure.
8. It is strictly forbidden to reach inside when working.
9. The electrical safety regulations must be observed when overhauling electrical parts
Whether the operation of the crimping machine is correct and reasonable is related to the quality of the crimping, so we will share the three points of attention to the operation of the crimping machine.
1. When crimping, prevent tools and other foreign objects from entering the crimping head.
2. When crimping, place the joint in the center of the mold as much as possible, and do not press on the hexagonal nut.
3. After the work is completed, the eight mold bases must be opened to the maximum extent, so that the spring can be in an open state and the spring can be maintained, and the oil cylinder is also in a pressure relief state to extend the life of the oil seal.
The staff abide by the operating precautions of the three-point crimping machine to better achieve the crimping effect.
Keyword:
the,of,crimping,be,and,in,is,must,to,hose,crimping,machine,finn,power,hydraulic,hose,for,excavator,radiator,crimping,machine,12,jis,hydraulic,fitting,manual,crimping,maschine,hydraulic,hose,crimping,swagger,en,856,r12,hydraulic,hose,hoses,machine,automatic
Products
CONTACT
Mona Tel: +8618522290645
Email: mona@bntflex.com
Wechat/Whatsapp:+8618522290645
Skype: barnettcrimpingmachine
Follow Us
Copyright © 2023 Dalian Barnett Flex Hydraulics Co.,Ltd.