What are the precautions for using the pipe cutting machine?

Time of issue:

2021-08-28

What are the precautions for using the pipe cutting machine? 1. The spindle speed change must be carried out after stopping. The gears must be fully meshed when shifting. When the machine tool is found to be abnormal, stop and check immediately. 2. Before cutting, the crimping machine equipment should adjust the cutter and clamp the work object. The length of the clamping part shall not be less than 50 mm. The parking baffle should be fixed, and work can only be carried out after the sequence of clamping, unclamping, forward and backward test runs. 3. When the machine tool is rotating, no part of the human body should touch the transmission parts. When operating, tie the cuffs, and it is strictly forbidden to work with gloves. The human head should deviate from the cutting direction. 4. When changing tools, measuring workpieces, lubricating, and cleaning pipe heads, the machine must be stopped. 5. When cutting the tube head, prevent the tube head from flying out and hurting people. 6. When the long material pipe is put into the material rack and the bundled lead wire is loosened, measures should be taken to prevent the pipe from rolling, impacting, and crushing people. 7. When using the grinding wheel pipe cutting machine, you should check in advance whether the grinding wheel is damaged, cracked, damp, and the power cord is reliable. 8. The dust removal device of the pipe cutting machine should be intact before cutting. 9. No one should stand in the direction of the workpiece in and out of the material.

2. Before cutting, the crimping machine equipment should adjust the cutter and clamp the work object. The length of the clamping part shall not be less than 50 mm. The parking baffle should be fixed, and work can only be carried out after the sequence of clamping, unclamping, forward and backward test runs.

3. When the machine tool is rotating, no part of the human body should touch the transmission parts. When operating, tie the cuffs, and it is strictly forbidden to work with gloves. The human head should deviate from the cutting direction.

4. When changing tools, measuring workpieces, lubricating, and cleaning pipe heads, the machine must be stopped.

5. When cutting the tube head, prevent the tube head from flying out and hurting people.

6. When the long material pipe is put into the material rack and the bundled lead wire is loosened, measures should be taken to prevent the pipe from rolling, impacting, and crushing people.

7. When using the grinding wheel pipe cutting machine, you should check in advance whether the grinding wheel is damaged, cracked, damp, and the power cord is reliable.

8. The dust removal device of the pipe cutting machine should be intact before cutting.

9. No one should stand in the direction of the workpiece in and out of the material.

Keyword:

the,and,be,when,should,is,machine,cutting,pipe,cutting,machine,crimping,machine,crimping,machine,automatic,high,pressure,air,hose,hydraulic,hose,rubber,hose,flexible,hydraulic,hose,sae,100,r12,hydraulics,hoses,presses,protable,hose,crimping,machine

Do you know the working principle of the crimping machine

What should be paid attention to when using the shrinking machine?

Do you know the working principle of the crimping machine

What should be paid attention to when using the shrinking machine?