Precautions for high pressure hose crimping machine
Time of issue:
2021-12-01
Precautions for high pressure hose crimping machine The hose crimping machine is a hydraulic equipment used to crimp the pipe fitting assembly. It applies the shrinking force to the matched metal joint through the mold of the crimping machine, and firmly crimps the metal joint on the matched construction machinery power pipe. Say that we pay more attention to the first operation when buying new machines. Add up to 46# or 32# hydraulic oil 55L at a time, so that the oil level can be added to 3/4 of the scale of the level gauge. Connect the power supply. If you are using a three-phase motor, be careful not to connect it in reverse. Lubricating the mold base: When the equipment starts to buckle the pipe, first add lithium-based grease or other suitable lubricants to the machine head mold base to fully lubricate the working friction surface. Air removal: just loosen the nut on the upper end of the machine head, no need to disassemble; press the lock button to inject oil and exhaust until the bleed nut oil is discharged; tighten the nut to ensure no oil leakage. Use of size adjuster: press 1mm more per turn, and so on, the same specification of hose and joint, the first metal joint reaches the required pressure, no need to move the positioner, and the specification is pressed all the time, as a result The compressed data is exactly the same.
Precautions for high pressure hose crimping machine
The hose crimping machine is a hydraulic equipment used to crimp the pipe fitting assembly. It applies the shrinking force to the matched metal joint through the mold of the crimping machine, and firmly crimps the metal joint on the matched construction machinery power pipe. Say that we pay more attention to the first operation when buying new machines.
Add up to 46# or 32# hydraulic oil 55L at a time, so that the oil level can be added to 3/4 of the scale of the level gauge. Connect the power supply. If you are using a three-phase motor, be careful not to connect it in reverse. Lubricating the mold base: When the equipment starts to buckle the pipe, first add lithium-based grease or other suitable lubricants to the machine head mold base to fully lubricate the working friction surface.
Air removal: just loosen the nut on the upper end of the machine head, no need to disassemble; press the lock button to inject oil and exhaust until the bleed nut oil is discharged; tighten the nut to ensure no oil leakage. Use of size adjuster: press 1mm more per turn, and so on, the same specification of hose and joint, the first metal joint reaches the required pressure, no need to move the positioner, and the specification is pressed all the time, as a result The compressed data is exactly the same.
Keyword:
high,the,to,of,machine,oil,and,is,joint,metal,hydraulic,hose,pipe,machine,hydraulic,hose,pipe,near,me,hydraulic,hose,pipes,hydraulic,hose,press,machine,for,sale,hydraulic,hose,repair,hydraulic,hose,repair,equipment,hydraulic,hose,skiving,machine
Products
CONTACT
Mona Tel: +8618522290645
Email: mona@bntflex.com
Wechat/Whatsapp:+8618522290645
Skype: barnettcrimpingmachine
Follow Us
Copyright © 2023 Dalian Barnett Flex Hydraulics Co.,Ltd.