Maintenance of skiving machine

Time of issue:

2021-06-11

Maintenance of skiving machine Maintenance and maintenance of the glue skiving machine: The working oil is recommended to use No. 46 anti-wear hydraulic oil, and the oil temperature is within the range of 15-60 degrees Celsius. 2. The oil is strictly filtered before it is allowed to be added to the oil tank. 3. The working fluid should be replaced once a year, and the replacement time should not exceed three months; 4. The sliding block should be lubricated frequently, and the exposed surface of the column should be kept clean frequently, and lubricating oil should be sprayed before each work. 5. Under the nominal pressure of 500T, the concentrated load is allowed to be 40mm eccentric. Excessive eccentricity may cause strain on the column or other undesirable phenomena. 6. Calibrate and check the pressure gauge every six months; 7. If the machine is out of service for a long time, the surface of each part should be scrubbed clean and coated with anti-rust oil.

Maintenance of skiving machine

Maintenance and maintenance of the glue skiving machine:

The working oil is recommended to use No. 46 anti-wear hydraulic oil, and the oil temperature is within the range of 15-60 degrees Celsius.
2. The oil is strictly filtered before it is allowed to be added to the oil tank.
3. The working fluid should be replaced once a year, and the replacement time should not exceed three months;
4. The sliding block should be lubricated frequently, and the exposed surface of the column should be kept clean frequently, and lubricating oil should be sprayed before each work.
5. Under the nominal pressure of 500T, the concentrated load is allowed to be 40mm eccentric. Excessive eccentricity may cause strain on the column or other undesirable phenomena.
6. Calibrate and check the pressure gauge every six months;
7. If the machine is out of service for a long time, the surface of each part should be scrubbed clean and coated with anti-rust oil.

Keyword:

the,be,and,of,should,is,oil,to,machine,crimping,machine,cutting,machine,used,hose,crimping,machine,hydraulic,hose,skiving,machine,hidraulica,cutter,rubber,crimper,hose,hydraulic,cleaning,machine,fittings,for,nitrogen,tube,swaging,machine,skiving,machine

Previous

none

How to use the crimping machine correctly?

Next:

Previous

none

Next:

How to use the crimping machine correctly?

Recommended news

Back