Hose Cutting Machine Precautions

Time of issue:

2022-04-16

Hose Cutting Machine Precautions When it is about to come into contact with steel, it automatically switches to the selected working feed speed to cut the pipe. After the operation is completed, the tool automatically rewinds to the original position. The auxiliary clamping device is installed on the cantilever and can move horizontally along the direction of the roller table. The auxiliary clamping device is equipped with three pairs of hydraulic cylinders with replaceable auxiliary claws, which are used to clamp the pipe head during the pipe cutting operation. Hydraulic cylinders are used to clamp and loosen pipes Hose cutting machine precautions: 1. Spindle shifting must be done after stopping. Gears should be fully engaged when shifting. When the machine tool is found to be abnormal, stop the machine immediately for inspection. 2. Before cutting, adjust the tool and clamp the workpiece. The length of the clamping part shall not be less than 50 mm. The parking baffle should be fixed, and the work can only be carried out after the sequence test of clamping, loosening, forward, and backward. 3. When the machine tool is rotating, no part of the human body should contact the transmission parts. When operating, tie the cuffs, and it is strictly forbidden to wear gloves to work. The human head should deviate from the cutting direction. 4. When changing the tool, measuring the workpiece, lubricating, and cleaning the pipe head, it must be stopped. 5. When cutting the pipe head, it is necessary to prevent the pipe head from flying out and hurting people. 6. When the long material pipe is put into the material rack and the lead wire is loosened, measures should be taken to prevent the pipe from rolling, impacting and crushing people. 7. When using the grinding wheel pipe cutting machine, check in advance whether the grinding wheel is damaged, cracked, damp, and whether the power cord is reliable.

Hose cutting machine precautions:

1. Spindle shifting must be done after stopping. Gears should be fully engaged when shifting. When the machine tool is found to be abnormal, stop the machine immediately for inspection.

2. Before cutting, adjust the tool and clamp the workpiece. The length of the clamping part shall not be less than 50 mm. The parking baffle should be fixed, and the work can only be carried out after the sequence test of clamping, loosening, forward, and backward.
3. When the machine tool is rotating, no part of the human body should contact the transmission parts. When operating, tie the cuffs, and it is strictly forbidden to wear gloves to work. The human head should deviate from the cutting direction.

4. When changing the tool, measuring the workpiece, lubricating, and cleaning the pipe head, it must be stopped.

5. When cutting the pipe head, it is necessary to prevent the pipe head from flying out and hurting people.

6. When the long material pipe is put into the material rack and the lead wire is loosened, measures should be taken to prevent the pipe from rolling, impacting and crushing people.

7. When using the grinding wheel pipe cutting machine, check in advance whether the grinding wheel is damaged, cracked, damp, and whether the power cord is reliable.

Keyword:

hose,machine,hose,press,swager,hydralic,crimper,hydralic,hose,crimper,hydralok,swaging,machine,hydraulic,a,c,hose,crimper,hydraulic,ac,hose,crimper,hydraulic,ac,hose,crimping,tool,hydraulic,crimp,machine,hydraulic,crimper,crimping,tool

What Is The Performance Of The Crimping Machine

Which industries are the automatic crimping machines mainly used for?

What Is The Performance Of The Crimping Machine

Which industries are the automatic crimping machines mainly used for?