Precautions for operating the hose crimping machine
Time of issue:
2021-02-21
Precautions for operating the hose crimping machine 1. When crimping the hose crimping machine, place the joint in the center of the mold as much as possible, and do not press on the hexagonal nut. 2. Prevent tools and other foreign objects from entering the lock. 3. The eight mold bases must be opened to the maximum after the work is completed, so that the spring can be in an open state. Otherwise, the spring will be damaged. 4. Do not reach into the lock when working to ensure personal safety. The power must be cut off during maintenance.
Precautions for operating the hose crimping machine
1. When crimping the hose crimping machine, place the joint in the center of the mold as much as possible, and do not press on the hexagonal nut.
2. Prevent tools and other foreign objects from entering the lock.
3. The eight mold bases must be opened to the maximum after the work is completed, so that the spring can be in an open state. Otherwise, the spring will be damaged.
4. Do not reach into the lock when working to ensure personal safety. The power must be cut off during maintenance.
Keyword:
the,be,crimping,do,when,spring,in,hose,mold
Products
CONTACT
Mona Tel: +8618522290645
Email: mona@bntflex.com
Wechat/Whatsapp:+8618522290645
Skype: barnettcrimpingmachine
Follow Us
Copyright © 2023 Dalian Barnett Flex Hydraulics Co.,Ltd.